POWERTEC Table Saw Rip Fence for BS900,Ryobi 9" with Adjustable Clamp (BS900RF)

Description

The Rip Fence for POWERTEC BS900 Wood Band Saw with Adjustable Clamp.
Ideal for use with the POWERTEC BS900 Wood Band Saw, and other compatible saw models. Conveniently designed to fit, and firmly clamp, on any 11-13/16” band saw table.
Its durable, industry-grade aluminum construction means it's built to get the job done every time. The POWERTEC Rip Fence installs square and solid for the optimum in high-performance sawing and critical worker safety.
Handy cam-lever provides both hassle-free adjustment and secure placement lock, providing the utmost in dependability and rigidity.
Sturdy Extruded aluminum construction means it's solid and durable
Provides for straight parallel cuts.
By using the handy adjustable cam, the clamp can adjust from 11-3/8-Inch up to 12-Inch
Arrives fully assembled, right out of the package
Simple, effective cam lever action means device is securely locked in place
For Work Table
The POWERTEC BS900RF is designed to work with the POWERTEC BS900 and similar model band saws with 300mm or 11-13/16” tables . The unique fence clamps directly to the table providing support for your ripping applications – no rails are required. By turning the lock lever, the fence can be adjusted from 11-3/8” to 12”. Turn counterclockwise to increase the length, and clockwise to decrease or shorten.
NOTE
: Fence will not work with table tops thicker than 9/16” or with table saws or other saws requiring guide rails.
Compatibility
POWERTEC 9" band saw BS900
Ryobi 9" bandsaw
Fit work table with 300 mm or 11-13/16”
Setting The Rip Fence
Raise the fence locking lever on the rip fence. Place the rip fence on the work table so that fence locking lever is at the front of the work table
Lower the fence locking lever in order to lock the rip fence in position on the work table.
If the fence is too loose, turn the locking lever clockwise to tighten. If the fence is too tight, turn the locking lever counterclockwise to loosen.
Once proper tension is set, press the head of the fence against the front of the table and lower the locking cam until it locks.
This fence clamps directly on the edge of your table, no guide rail needed. If there is flashing located along the edge of your table the fence may not clamp correctly. Please remove any flashing with a file before using the fence.
If the fence is not parallel to the blade or needs to be moved to correct blade drift, it can be adjusted by loosening the two screws on top of the fence.
Unclamp the fence and press the head against the table to make sure it is square to the table
Loosen the two screws on top of the fence block and move the fence the required amount
Tighten the two screws and clamp to make sure fence is now in the proper alignment.
POWERTEC
is a US based manufacturer of high quality woodworking machines, wood work accessories, and a wide assortment of OEM replacement parts. We are committed to exceeding expectations, while bringing the best innovations, technologies, and product development to the industry.